We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480611199
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480611199, call FAMAGA, the world's principle retailer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and individual attention to each customer. We value everyone, who engaged with us - so, our regular purchasers bring in the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Greece, Swaziland, Malawi, Armenia, Indonesia, Myanmar, Guyana, Qatar, Fiji, Lebanon, Burkina Faso, Papua New Guinea, Belgium, Mozambique, Oman, Singapore, Libya, Canada, Pakistan, Mexico, Algeria, Zimbabwe, Niger, Brunei, Moldova, Dominica, Senegal, Croatia, Madagascar, Vietnam, Ukraine, Nepal, Iran, Switzerland, Malaysia, Ireland, Togo, Botswana, South Sudan, Nigeria, El Salvador, The Gambia, Finland, Georgia, Tajikistan, Kenya, Afghanistan, Lithuania. A well-developed logistics chains and a partnership network guide us to deliver our goods anywhere in the planet quickly without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |