We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822494202
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822494202, connect FAMAGA, the world's leading producer of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and special attention to each client. We praise everyone, who cooperated with us - thus, our regular buyers receive the most flexible purchase forms and discounts on the industrial equipment market. Today, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Chad, Sierra Leone, Austria, Namibia, Niger, Haiti, Liechtenstein, United Arab Emirates, Lithuania, Antigua and Barbuda, Burundi, Dominica, Tunisia, Algeria, Qatar, Andorra, Iran, Malawi, New Zealand, Cyprus, Tanzania, Equatorial Guinea, Belize, Sudan, Denmark, Georgia, Israel, Jordan, Cameroon, Kazakhstan, Kenya, Bolivia, Bulgaria, Comoros, Azerbaijan, Kuwait, Burkina Faso, Chile, Bangladesh, Rwanda, Seychelles, Bosnia and Herzegovina, Mexico, Czech Republic, Uruguay, Mongolia, Philippines. A well-shaped logistics system and a partnership network guide us to send our units anywhere in the globe promptly without discrediting product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |