We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006215
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 2600 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412006215, catch up with FAMAGA, the world's main distributor of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and private attention to each client. We value everyone, who conspired with us - thus, our regular buyers procure the most convenient purchase terms and discounts on the industrial equipment market. Now, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, The Bahamas, Spain, Madagascar, Ireland, Belarus, Bosnia and Herzegovina, Kenya, Botswana, Papua New Guinea, Philippines, Georgia, Sudan, Croatia, Tajikistan, Eswatini, Guinea, United Arab Emirates, Suriname, Japan, Dominica, Tanzania, Bolivia, Zimbabwe, Haiti, Vietnam, Malta, Mozambique, Jamaica, Malaysia, Indonesia, Djibouti, Kiribati, Swaziland, Kazakhstan, El Salvador, New Zealand, Russia, Kyrgyzstan, South Korea, Costa Rica, Seychelles, Austria, The Gambia, Ghana, Mexico, Syria, Finland, Tonga. A well-built logistics system and a partnership network assist us to send our units anywhere in the globe quickly without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this bulk is growing every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or book, contact us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 28 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |