We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472412268
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472412268, get in touch with FAMAGA, the world's key retailer of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of items and special attention to each purchaser. We respect everyone, who worked with us - therefore, our regular clients accept the most desirable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Lebanon, Andorra, Tanzania, Myanmar, Djibouti, Comoros, India, Bangladesh, Guinea, Kuwait, Turkey, Serbia, Iran, Suriname, Argentina, Equatorial Guinea, Hungary, Greece, Singapore, Chad, Uganda, Mongolia, Peru, Gambia, Slovakia, Rwanda, Malta, Malaysia, Libya, Burkina Faso, Belarus, Chile, Sudan, Czech Republic, Afghanistan, Tunisia, Brunei, Montenegro, Iraq, Moldova, Bolivia. A advanced logistics connection and a partnership network allow us to conduct our items anywhere in the world on-time without undermining product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is rising every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as keep on top of it.
To ask a question or place an order, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |