We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822084205
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822084205, call FAMAGA, the world's influential retailer of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of items and personalseparate attention to each customer. We understand everyone, who joined with us - thus, our regular buyers pick up the most desirable purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Slovenia, Guinea, The Bahamas, Estonia, Fiji, Israel, Nepal, Paraguay, Malaysia, Guatemala, Jamaica, Kazakhstan, Iceland, Brunei, Ghana, Switzerland, Ireland, Syria, Argentina, Indonesia, Brazil, New Zealand, Bolivia, Togo, Sweden, Botswana, Niger, Angola, Georgia, South Korea, Egypt, Mauritius, Madagascar, Costa Rica, Sudan, Seychelles, Latvia, Philippines, Swaziland, Yemen, The Gambia, Mauritania, Cape Verde. A well-developed logistics bond and a partnership network cheer us to deliver our items anywhere in the world promptly without compromising product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |