We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2621601010
Description
Standardization | ISO 5599-2 |
Cable exit | straight |
Number of valve positions | 1 |
Frame size | ISO 1 |
Housing | Die-cast aluminum |
Sealing material | Aluminum |
Subbase | Die-cast aluminum |
Type | without wire end ferrule, tin-plated |
Nominal flow Qn | 1500 l/min |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 3/8 |
Operational voltage AC at 60 Hz | 110 V |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 2621601010, communicate with FAMAGA, the world's dominant supplier of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each client. We cherish everyone, who joined with us - therefore, our regular clients obtain the most helpful purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4000 such clients, and we constantly arrange new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Eritrea, Guyana, Portugal, Greece, Australia, Argentina, Belgium, Czech Republic, Bahamas, Israel, Lebanon, Singapore, Turkmenistan, Suriname, Ecuador, Montenegro, Bosnia and Herzegovina, Andorra, Norway, Zimbabwe, Tunisia, Malawi, Kiribati, Tanzania, Bulgaria, Senegal, Ukraine, Estonia, Algeria, Uzbekistan, Slovakia, Hungary, Fiji, Laos, Panama, El Salvador, Burundi, Lithuania, Tonga, Vietnam, Rwanda, Cape Verde, India, Chile, Cameroon, Iran. A well-shaped logistics connection and a partnership network help us to ship our goods anywhere in the earth promptly without damaging product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Standards | ISO 5599-2 |
Compressed air connection | according to ISO 5599 |
Nominal flow Qn | 1500 l/min |
Working pressure min./max. | -0,95 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -14 ... 50 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Direction of pneumatic port (1) | On the side |
Direction of pneumatic port (2,4) | On the side |
Direction of pneumatic port (12) | On the side |
Direction of pneumatic port (14) | On the side |
Exhaust (3,5) | uncollected exhaust |
Exhaust type | Ports separated |
Tightening torque for mounting screws | 3 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die-cast aluminum, painted gray |
Surface | anodized |
Base plate | Die-cast aluminum |
Seal | Aluminum, anodized |