We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R404059486 (ICM-DA-032-0012-0) AVENTICS - Minizylinder, Serie ICM
Part number
R404059486
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R404059486 (ICM-DA-032-0012-0) AVENTICS - Minizylinder, Serie ICM R404059486, make contact with FAMAGA, the world's the best distributor of factory-made equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each orderer. We appreciate everyone, who conspired with us - so, our regular clients accept the most convenient purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Myanmar, Ukraine, South Sudan, Indonesia, Colombia, Burma, Swaziland, Georgia, Costa Rica, Burundi, El Salvador, Syria, Jamaica, Tonga, Honduras, Togo, Cape Verde, Singapore, Malta, Benin, Egypt, Croatia, Albania, South Korea, Guatemala, The Bahamas, Turkmenistan, Belarus, Czech Republic, Cyprus, Bolivia, Suriname, Dominica, Kiribati, Afghanistan, Moldova, Nigeria, Luxembourg, Madagascar, Botswana, Niger, East Timor, Kyrgyzstan, Poland, Sweden, Finland, Denmark. A well-built logistics network and a partnership network let us to ship our elements anywhere in the planet on-time without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |