We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472412344
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472412344, get in touch with FAMAGA, the world's leading company of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and individual attention to each purchaser. We respect everyone, who cooperated with us - so, our regular consumers accept the most flexible purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, El Salvador, Mauritania, Kiribati, Italy, Jamaica, Palestine, Mongolia, Uzbekistan, Estonia, Armenia, Monaco, Laos, Pakistan, Tunisia, Chile, Rwanda, North Korea, Finland, Senegal, Australia, Lithuania, Austria, Uganda, Iran, Bolivia, Uruguay, Mauritius, Namibia, Slovakia, Antigua and Barbuda, Philippines, Burkina Faso, Sierra Leone, Swaziland, Azerbaijan, Mozambique, Czech Republic, Russia, Bulgaria, Nepal, Norway, East Timor, Bangladesh, United Arab Emirates, Kazakhstan, Benin. A well-built logistics connection and a partnership network let us to dispatch our units anywhere in the globe with no delay without disreputing product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.
To inquire or place an order, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |