We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680352
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 320 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480680352, contact FAMAGA, the world's top company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each customer. We admire everyone, who engaged with us - thus, our regular clients accept the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such buyers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Chad, Turkmenistan, Portugal, Benin, Tajikistan, Montenegro, Egypt, Iran, Myanmar, Yemen, Senegal, Serbia, Australia, Dominica, Niger, Bosnia and Herzegovina, Guinea, Malawi, Singapore, Hungary, Suriname, El Salvador, Cameroon, Uruguay, Croatia, Afghanistan, Bangladesh, Sierra Leone, Brazil, Mauritania, Belize, Liechtenstein, Greece, Jordan, Antigua and Barbuda, Botswana, Macedonia, Paraguay, Laos, Seychelles, Eswatini, East Timor. A well-elaborated logistics link and a partnership network cheer us to send our units anywhere in the world promptly without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this amount is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or order, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |