We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006011
Description
Parts | Filter |
Condensate drain | fully automatic, closed without pressure |
filter porosity | 5 µm |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 2100 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412006011, communicate with FAMAGA, the world's principle distributor of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each orderer. We understand everyone, who cooperated with us - hence, our regular buyers receive the most desirable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Saudi Arabia, Macedonia, Nigeria, Suriname, Liberia, Palestine, East Timor, Eritrea, Malta, Fiji, Indonesia, Uzbekistan, Ecuador, Bangladesh, Oman, Kenya, Vietnam, Algeria, Burundi, Malawi, Finland, Argentina, Georgia, Malaysia, Ireland, Gambia, Turkmenistan, Eswatini, Djibouti, Uganda, Mauritius, Zambia, Iran, Greece, Mali, Morocco, Libya, Senegal, Antigua and Barbuda, Hungary, Iceland. A well-shaped logistics system and a partnership network help us to send our units anywhere in the globe with no delay without damaging product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, get in touch with us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 28 cm³ |
Filter element | exchangeable |
filter porosity | 5 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |