We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820038104
Description
Actuating control | single solenoid |
Return type | With spring/air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 500 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820038104, contact FAMAGA, the world's top provider of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of outcomes and individual attention to each purchaser. We praise everyone, who collaborated with us - therefore, our regular consumers get the most helpful purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Fiji, Peru, Pakistan, Algeria, Russia, Italy, Liechtenstein, Vietnam, Tunisia, New Zealand, Angola, Philippines, Slovenia, Gambia, Luxembourg, Armenia, Romania, Malaysia, Brazil, Burkina Faso, Denmark, Kenya, Rwanda, El Salvador, The Gambia, China, Laos, Tajikistan, Nicaragua, Ireland, East Timor, Egypt, Mauritania, Equatorial Guinea, Brunei, Sweden, Cyprus, Mexico, Botswana. A advanced logistics connection and a partnership network allow us to conduct our units anywhere in the planet as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, get in touch with us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 500 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Mounting on manifold strip | PRS strip |
mounting screws | M3 |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Seals | Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |
Threaded bushing | Aluminum |