We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822383008
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822383008, contact FAMAGA, the world's main provider of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of products and personalseparate attention to each buyer. We admire everyone, who worked with us - thus, our regular customers get the most acceptable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such customers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Gabon, Cape Verde, Latvia, Yemen, Luxembourg, Fiji, Italy, India, Mauritania, Lithuania, Peru, Pakistan, Jamaica, Ukraine, Mexico, Libya, Panama, Benin, New Zealand, East Timor, Brazil, Hungary, Eritrea, Equatorial Guinea, Serbia, Albania, Japan, Azerbaijan, Mozambique, Ghana, Bolivia, China, Morocco, Qatar, Liechtenstein, Vietnam, Sweden, Dominica, Togo, Russia, Cameroon, Norway, Switzerland, Ireland, The Gambia, Swaziland. A advanced logistics chains and a partnership network allow us to deliver our goods anywhere in the earth as soon as possible without undermining product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or place an order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |