We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177381
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | 1-14 UNF |
Stroke | 304.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480177381, call FAMAGA, the world's prime company of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of merchandises and individual attention to each user. We value everyone, who conspired with us - hence, our regular clients procure the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Gabon, Armenia, Madagascar, Thailand, Uzbekistan, Albania, Moldova, Cambodia, The Gambia, Colombia, El Salvador, Greece, Jordan, Rwanda, Togo, Brunei, Nepal, Botswana, Dominica, Sweden, Finland, Liberia, South Sudan, Yemen, Japan, Suriname, Qatar, Cameroon, Comoros, Kazakhstan, Vietnam, Cape Verde, Haiti, Liechtenstein, South Korea, Libya, Malaysia, Philippines, Serbia, Poland, Bolivia, Djibouti, Austria, Pakistan, Costa Rica, Mexico, Afghanistan, Iraq, Egypt, Estonia. A well-developed logistics system and a partnership network guide us to deliver our elements anywhere in the world immediately without undermining product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that users choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |