We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020695
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412020695, call FAMAGA, the world's chief producer of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each buyer. We esteem everyone, who worked with us - thus, our regular clients accept the most favorable purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Central African Republic, Eritrea, Guyana, Dominican Republic, Moldova, Costa Rica, Italy, Poland, Estonia, Burkina Faso, Sierra Leone, Rwanda, Oman, Nepal, Antigua and Barbuda, Lebanon, Vietnam, Tanzania, Haiti, The Gambia, Japan, Namibia, Mauritania, Andorra, Botswana, Latvia, Libya, Jamaica, Yemen, Sweden, Samoa, Niger, Georgia, Afghanistan, Comoros, Angola, East Timor, Kuwait, Morocco, Switzerland, Tajikistan, Cameroon, Guatemala, Ukraine, Djibouti, Belarus, Malaysia, Dominica. A well-developed logistics chains and a partnership network assist us to ship our units anywhere in the globe with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or book, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |