We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503603
Description
Number of valve positions | 3 |
Subbase | Aluminum |
Compressed air connection input | G 1/8 |
Compressed air connection output | Ø 4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1825503603, communicate with FAMAGA, the world's major producer of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of outcomes and particular attention to each customer. We cherish everyone, who conspired with us - so, our regular consumers receive the most beneficial purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Bosnia and Herzegovina, South Sudan, Georgia, Kyrgyzstan, Dominican Republic, Canada, Indonesia, Botswana, Belgium, Latvia, Oman, Singapore, Montenegro, Guyana, Costa Rica, Eswatini, Liberia, Luxembourg, Nigeria, Netherlands, Panama, El Salvador, Israel, Mexico, Kiribati, Burkina Faso, Morocco, Turkey, Vietnam, Syria, Tajikistan, Mauritania, Libya, United Arab Emirates, Nepal, Swaziland, Cyprus, Ecuador, Mauritius, Haiti, Serbia, Croatia, Norway, Seychelles, Laos, Finland, Afghanistan, Togo, Antigua and Barbuda. A well-shaped logistics series and a partnership network assist us to dispatch our goods anywhere in the planet with no delay without discrediting product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, contact us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Working pressure min./max. | 0 ... 10 bar |
Medium | Compressed air |
Grid dimension | 23 mm |
Direction of pneumatic port (2,4) | On the side |
Exhaust (3,5) | With directional exhaust (3/5) |
Mounting screw | M3 |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |
push-in fitting | Brass |