We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007200
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412007200, contact FAMAGA, the world's chief supplier of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of products and individual attention to each client. We cherish everyone, who worked with us - therefore, our regular customers receive the most beneficial purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Chad, India, Laos, Mauritius, Malta, Saudi Arabia, Congo, Palestine, Senegal, Georgia, France, North Korea, Tonga, Belgium, Ireland, Libya, Seychelles, Eswatini, Moldova, Nigeria, Syria, Sierra Leone, South Korea, Uganda, Ecuador, Turkmenistan, Niger, Cameroon, United Arab Emirates, Uruguay, Haiti, Brazil, Antigua and Barbuda, Angola, Argentina, Cape Verde, Vietnam, Ukraine, Paraguay, Greece, Egypt, Algeria, Afghanistan, Ghana, Bosnia and Herzegovina, Hungary, Peru. A advanced logistics network and a partnership network allow us to conduct our goods anywhere in the earth promptly without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |