We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000929
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Stroke | 50 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R402000929, reach FAMAGA, the world's major retailer of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and personalseparate attention to each customer. We understand everyone, who cooperated with us - therefore, our regular buyers bring in the most convenient purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Antigua and Barbuda, Argentina, Chile, France, Kiribati, Saudi Arabia, Gambia, Equatorial Guinea, Bolivia, India, Armenia, Mexico, Australia, Nepal, Mongolia, Paraguay, Brazil, Chad, Azerbaijan, Yemen, Liberia, Denmark, North Korea, Kazakhstan, Macedonia, Peru, Uzbekistan, Jordan, Austria, Kenya, Libya, United States, Albania, Greece, New Zealand, Rwanda, Latvia, Tonga, Sweden, Uganda, Vietnam, Bulgaria, Mauritania. A well-developed logistics series and a partnership network cheer us to deliver our goods anywhere in the world as soon as possible without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |