We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822390604
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822390604, get in touch with FAMAGA, the world's prime supplier of manufacturing equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of spare parts and personalseparate attention to each client. We value everyone, who cooperated with us - therefore, our regular consumers obtain the most convenient purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Guinea, Chile, Iraq, Guinea-Bissau, Turkey, Turkmenistan, Mongolia, Indonesia, Thailand, Iran, Gambia, Ecuador, Uruguay, Nicaragua, Bosnia and Herzegovina, Argentina, Zambia, Paraguay, Kyrgyzstan, Antigua and Barbuda, Croatia, Senegal, Sweden, Greece, Slovakia, Cyprus, Montenegro, Zimbabwe, Dominica, Sudan, Estonia, Tanzania, Czech Republic, Laos, Lithuania, Latvia, Kiribati, Cameroon. A well-elaborated logistics network and a partnership network let us to deliver our products anywhere in the planet as soon as possible without discrediting product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |