We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480647253
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480647253, catch up with FAMAGA, the world's principle vendor of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and personalseparate attention to each consumer. We esteem everyone, who engaged with us - therefore, our regular customers bring in the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Venezuela, Belize, Philippines, Malawi, Palestine, Eritrea, Lithuania, Australia, Tonga, Burundi, Nicaragua, United Arab Emirates, Saudi Arabia, Laos, Namibia, Samoa, Macedonia, Equatorial Guinea, Uruguay, Azerbaijan, Guyana, Niger, Burkina Faso, Norway, Uganda, Bosnia and Herzegovina, Mozambique, North Korea, Zambia, Armenia, Mongolia, Swaziland, Paraguay, Malta, New Zealand, Central African Republic, Tanzania, Bulgaria, Chile. A well-elaborated logistics link and a partnership network guide us to send our goods anywhere in the earth on-time without compromising product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as stay in control.
To inquire or book, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |