We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010556
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 40 mm |
Piston rod thread | M6 |
Stroke | 40 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822010556, contact FAMAGA, the world's principle company of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of products and special attention to each orderer. We admire everyone, who joined with us - therefore, our regular clients receive the most helpful purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Angola, Namibia, Mauritania, India, Bahamas, Eswatini, Uruguay, Gambia, Fiji, Israel, Argentina, Azerbaijan, Finland, The Gambia, Seychelles, Armenia, Australia, Bangladesh, Sweden, Ghana, Philippines, Tanzania, Tonga, Nicaragua, Greece, Albania, Iraq, Liberia, Paraguay, Serbia, Ecuador, Hungary, New Zealand, Tunisia, Senegal, Iran, Norway, Croatia, Chile, Cape Verde, Iceland, Libya, Kenya, Bosnia and Herzegovina. A well-shaped logistics bond and a partnership network guide us to send our elements anywhere in the earth as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that users choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |