We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5514400030
Description
Number of valve positions | 3 |
For series | 551 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5514400030, reach FAMAGA, the world's foremost company of machine made equipment. Our company has existed for more than ten years - these are years of experience, which are portrayed in the quality of merchandises and personalseparate attention to each purchaser. We esteem everyone, who cooperated with us - hence, our regular customers pick up the most attractive purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such customers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Guinea-Bissau, Zambia, Nepal, Bangladesh, Comoros, Tunisia, Mauritania, Malawi, Nigeria, Costa Rica, Morocco, Luxembourg, Senegal, Bosnia and Herzegovina, Mexico, Uzbekistan, Malaysia, Tonga, El Salvador, Netherlands, Namibia, Belarus, Eswatini, Ireland, Armenia, Swaziland, Bulgaria, United Arab Emirates, Togo, Gambia, Ghana, Djibouti, Mauritius, Cape Verde, Andorra, Pakistan, Cameroon, Qatar, Burkina Faso, Serbia, Argentina, East Timor, Paraguay, Latvia, Jordan, South Korea, Lithuania. A well-developed logistics connection and a partnership network assist us to send our products anywhere in the world promptly without disreputing product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as keep on top of it.
To consult or place an order, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Screws | Steel |
Tie-rods | Steel |
Mounting bracket | Aluminum |