We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822393007
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822393007, reach FAMAGA, the world's principle retailer of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of outputs and individual attention to each customer. We cherish everyone, who liased with us - thus, our regular clients procure the most helpful purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such clients, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Dominican Republic, Thailand, Russia, Honduras, Cuba, Antigua and Barbuda, Kenya, Slovenia, Romania, Malaysia, Libya, Zambia, Suriname, Uruguay, Samoa, Indonesia, South Korea, South Sudan, Philippines, Bangladesh, The Gambia, Netherlands, Estonia, East Timor, Zimbabwe, Guatemala, Czech Republic, Vietnam, Luxembourg, Tajikistan, Ecuador, Burkina Faso, Hungary, Fiji, Central African Republic, Croatia, Iran, Sweden, Kiribati, Georgia, United Arab Emirates, Seychelles, Finland, Botswana, Senegal, Serbia, Panama. A well-shaped logistics series and a partnership network assist us to conduct our goods anywhere in the earth on-time without damaging product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or make a request, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |