We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680349
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480680349, communicate with FAMAGA, the world's major distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each purchaser. We respect everyone, who conspired with us - thus, our regular consumers obtain the most flexible purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Guinea, East Timor, North Korea, Belgium, Bhutan, Panama, Serbia, Saudi Arabia, Liechtenstein, Ukraine, Yemen, Guatemala, Iraq, Zimbabwe, Slovakia, Uruguay, Ghana, Malta, Norway, Malawi, Denmark, Ecuador, Mali, Liberia, Fiji, Czech Republic, Brunei, Nigeria, Namibia, Burundi, Croatia, Kazakhstan, Afghanistan, Cameroon, Tajikistan, Kenya, Mauritius, Sierra Leone, Finland, Eswatini, Armenia, Senegal, Niger, Hungary, Dominica, Argentina, India. A advanced logistics connection and a partnership network allow us to conduct our items anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |