Aventics (brand of Emerson) R412019855
  Aventics (brand of Emerson) R412019855

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R412019855 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R412019855

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 50 mm
Piston rod thread M10
Standardization ISO 15524
Stroke 20 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/4
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R412019855

If you are questing Aventics (brand of Emerson) R412019855, communicate with FAMAGA, the world's top distributor of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are portrayed in the quality of goods and special attention to each user. We cherish everyone, who collaborated with us - thus, our regular purchasers accept the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the world . A well-developed logistics system and a partnership network guide us to dispatch our products anywhere in the earth on-time without damaging product quality.

A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.

All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.

To ask a question or make a request, contact us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features R412019855

Standards ISO 15524
Compressed air connection Internal thread
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Use our Internet configurator to order variants with an external thread.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Brass Aluminum
End cover Aluminum
Seal Nitrile butadiene rubber Polyurethane
Scraper Nitrile butadiene rubber Polyurethane
See table for additional data on materials.