We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822390601
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Standardization | NFE 49004 |
Stroke | 10 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822390601, communicate with FAMAGA, the world's major provider of factory-made equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of products and special attention to each buyer. We value everyone, who collaborated with us - therefore, our regular purchasers receive the most convenient purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Saudi Arabia, Zimbabwe, Eswatini, Chad, Bolivia, Samoa, Uzbekistan, Armenia, Morocco, Burkina Faso, Guinea, Bhutan, Rwanda, Sudan, Turkey, Denmark, Kiribati, Gambia, Kenya, Antigua and Barbuda, Brazil, Liechtenstein, Angola, Kazakhstan, Nepal, Zambia, Niger, Cameroon, Panama, Senegal, Brunei, Andorra, Belize, India, Tajikistan, Burundi, Benin, Ukraine, Laos, Australia, Israel, Czech Republic, Costa Rica, Slovakia, Mongolia. A well-built logistics system and a partnership network cheer us to send our products anywhere in the planet as soon as possible without disreputing product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |