Aventics (brand of Emerson) 7472412341
  Aventics (brand of Emerson) 7472412341

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

7472412341 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

7472412341

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 125 mm
Piston rod thread M27x2
Standardization ISO 15552
Stroke 160 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/2
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 7472412341

If you are inspecting Aventics (brand of Emerson) 7472412341, catch up with FAMAGA, the world's influential producer of manufacturing equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of outputs and private attention to each orderer. We esteem everyone, who joined with us - hence, our regular customers receive the most favorable purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4500 such clients, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA works all over the world . A well-developed logistics network and a partnership network let us to deliver our goods anywhere in the world with no delay without compromising product quality.

A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of industrial equipment.

All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as to stay on the top.

To get some advice or book, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 7472412341

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed!
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Trunnion mounting Nodular graphite iron, galvanized
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.