We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1331610000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1331610000, catch up with FAMAGA, the world's prime company of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are outlined in the quality of spare parts and individual attention to each buyer. We cherish everyone, who engaged with us - so, our regular clients pick up the most helpful purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such clients, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Guatemala, South Africa, Morocco, Egypt, Uganda, Romania, Burkina Faso, France, Slovenia, Monaco, Haiti, Estonia, South Sudan, Botswana, Benin, Mongolia, Nepal, Mauritius, Belarus, Dominica, Latvia, Angola, Belize, Austria, Serbia, Guyana, Tunisia, Indonesia, Australia, Luxembourg, Kuwait, Comoros, Costa Rica, Poland, Mexico, Philippines, Syria, Burundi, United States, Ukraine, Cape Verde, Mozambique, Switzerland, Antigua and Barbuda. A advanced logistics chains and a partnership network help us to conduct our goods anywhere in the globe immediately without discrediting product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To inquire or order, get in touch with us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |