Aventics (brand of Emerson) 0822234010
  Aventics (brand of Emerson) 0822234010

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822234010 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822234010

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Piston diameter 25 mm
Piston rod thread M10x1,25
Standardization ISO 6432
Stroke 320 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822234010

If you are pursuing Aventics (brand of Emerson) 0822234010, reach FAMAGA, the world's leading company of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each orderer. We understand everyone, who liased with us - therefore, our regular clients accept the most desirable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the world . A well-shaped logistics series and a partnership network help us to deliver our elements anywhere in the world promptly without damaging product quality.

A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of factory-made equipment.

All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.

To inquire or make a request, contact us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features 0822234010

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane