We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668799
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480668799, call FAMAGA, the world's main provider of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of merchandises and private attention to each consumer. We value everyone, who joined with us - hence, our regular purchasers receive the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Estonia, Philippines, South Korea, Egypt, Samoa, Vietnam, Uganda, Eritrea, Honduras, Mozambique, Lebanon, Singapore, Yemen, El Salvador, Tonga, Romania, Albania, Afghanistan, Kyrgyzstan, Gambia, Liberia, Netherlands, Fiji, Comoros, Kuwait, Finland, Chile, Qatar, Togo, Sweden, Dominica, Cape Verde, Ireland, Eswatini, Djibouti, Indonesia, Mauritania, Kazakhstan, Panama, Algeria, The Gambia, Zambia, Zimbabwe, Australia. A well-shaped logistics link and a partnership network let us to ship our elements anywhere in the planet with no delay without damaging product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |