We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020644
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412020644, make contact with FAMAGA, the world's foremost provider of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of merchandises and private attention to each orderer. We praise everyone, who collaborated with us - therefore, our regular buyers procure the most desirable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Iceland, North Korea, Kyrgyzstan, Chile, Mali, Kenya, East Timor, Chad, Guinea, Libya, Canada, Malawi, Thailand, Jordan, Cyprus, Saudi Arabia, Lithuania, Ghana, Seychelles, Guyana, The Bahamas, Liberia, Ecuador, Austria, Australia, Greece, Burkina Faso, Denmark, Kiribati, Uganda, Bangladesh, Nigeria, Niger, Vietnam, India, Senegal, Hungary, Madagascar, Tanzania, Zimbabwe, Tunisia, Samoa, Bosnia and Herzegovina, Suriname. A well-built logistics network and a partnership network guide us to deliver our units anywhere in the world with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as stay in control.
To request or place an order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |