We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680380
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480680380, make contact with FAMAGA, the world's central retailer of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each client. We praise everyone, who joined with us - thus, our regular purchasers pick up the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Guinea-Bissau, Cameroon, New Zealand, Turkmenistan, Philippines, Liberia, Japan, Algeria, India, Rwanda, Niger, Antigua and Barbuda, Guatemala, Hungary, Switzerland, Dominica, Israel, Netherlands, Vietnam, Guinea, Andorra, Comoros, Botswana, Seychelles, Pakistan, Jordan, Uganda, Bosnia and Herzegovina, Slovakia, Belarus, Tanzania, Mauritius, Ecuador, Benin, Kiribati, Mali, Sudan, Ghana, Thailand, Denmark, Senegal, Kyrgyzstan. A well-built logistics connection and a partnership network let us to ship our units anywhere in the globe promptly without disreputing product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |