We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480634923
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480634923, communicate with FAMAGA, the world's leading supplier of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of products and personalseparate attention to each orderer. We cherish everyone, who cooperated with us - so, our regular consumers get the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Norway, Mexico, Egypt, Austria, Uzbekistan, Argentina, Dominica, Burma, Seychelles, Canada, Iran, Namibia, Macedonia, Thailand, Indonesia, United Arab Emirates, Eritrea, Vietnam, Georgia, Denmark, Monaco, Mozambique, Brazil, The Gambia, Jamaica, Benin, Swaziland, United States, Burkina Faso, Angola, Sweden, Burundi, Guatemala, Armenia, Finland, Brunei, Albania, Ukraine. A well-elaborated logistics bond and a partnership network allow us to send our products anywhere in the globe with no delay without disreputing product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |