We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332406
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822332406, contact FAMAGA, the world's the best company of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each buyer. We understand everyone, who cooperated with us - so, our regular clients pick up the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Seychelles, Portugal, Guinea, Algeria, Myanmar, Serbia, Syria, Fiji, Belgium, Norway, Dominica, Afghanistan, Ecuador, Nicaragua, Malawi, Kyrgyzstan, Czech Republic, Moldova, South Korea, Nigeria, Turkmenistan, Croatia, Mauritius, Argentina, Brazil, Uganda, Denmark, Bangladesh, Bosnia and Herzegovina, Namibia, Kiribati, Botswana, Equatorial Guinea, Indonesia, Australia, Vietnam, Iran, Mexico. A advanced logistics system and a partnership network assist us to conduct our units anywhere in the globe as soon as possible without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, contact us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |