We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822082208
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822082208, make contact with FAMAGA, the world's key producer of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of goods and individual attention to each consumer. We praise everyone, who worked with us - therefore, our regular customers get the most favorable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Dominica, Gambia, Jordan, Guinea, Lebanon, South Korea, Congo, Burma, Vietnam, Namibia, Saudi Arabia, Ecuador, Mauritius, Kenya, Grenada, United Arab Emirates, Uruguay, Central African Republic, Philippines, Montenegro, Morocco, Hungary, Serbia, Liechtenstein, Ghana, Bulgaria, Jamaica, Lithuania, Croatia, Norway, Kazakhstan, Niger, Afghanistan, Eswatini, Zimbabwe, Botswana, Cameroon, East Timor. A advanced logistics chains and a partnership network let us to conduct our units anywhere in the globe promptly without undermining product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or book, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |