We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472412264
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472412264, make contact with FAMAGA, the world's foremost producer of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of items and private attention to each client. We praise everyone, who engaged with us - therefore, our regular customers get the most desirable purchase forms and discounts on the factory-made equipment market. Today, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Ukraine, Laos, South Africa, Tonga, Malta, Mauritius, North Korea, Malawi, Mauritania, Thailand, Burma, The Bahamas, Tanzania, Hungary, Denmark, Egypt, Eritrea, Belize, Monaco, Pakistan, Uzbekistan, Jordan, Bangladesh, Afghanistan, Azerbaijan, Samoa, Bulgaria, Botswana, Chile, El Salvador, Uruguay, Burundi, Niger, Nigeria, Swaziland, Greece, India. A well-developed logistics system and a partnership network guide us to deliver our items anywhere in the world promptly without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |