We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822206407
Description
| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Piston diameter | 125 mm |
| Piston rod thread | M27x2 |
| Standardization | ISO 15552 |
| Stroke | 200 mm |
| Sealing material | Fluorocaoutchouc |
| Scraper | Fluorocaoutchouc |
| Compressed air connection | G 1/2 |
| Compressed air connection type | Internal thread |
| Temperature resistance | Heat resistant |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Aventics (brand of Emerson) 0822206407, call FAMAGA, the world's foremost provider of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of items and special attention to each buyer. We understand everyone, who conspired with us - therefore, our regular customers obtain the most desirable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Czech Republic, Senegal, Niger, Moldova, Brazil, Mauritius, Gambia, Malawi, Netherlands, Turkmenistan, Denmark, Cape Verde, Burundi, Israel, Algeria, Chile, East Timor, Bolivia, Zambia, Georgia, China, Nepal, Armenia, Greece, Belize, Panama, Azerbaijan, Mongolia, Kuwait, Cameroon, Morocco, Equatorial Guinea, Finland, Kenya, Lithuania, Bangladesh, Ghana, Tanzania, Iran, Austria. A advanced logistics connection and a partnership network help us to send our goods anywhere in the world promptly without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or order, contact us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -10 ... 150 °C |
| Medium temperature min./max. | -10 ... 150 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Fluorocaoutchouc |
| Nut for piston rod | Steel, galvanized |
| Scraper | Fluorocaoutchouc |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
