We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5894420210
Description
Return type | With spring return |
Switching principle | 3/2 |
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 12 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5894420210, reach FAMAGA, the world's leading supplier of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of products and individual attention to each client. We understand everyone, who worked with us - thus, our regular consumers pick up the most helpful purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Turkmenistan, Burma, The Bahamas, Myanmar, France, Netherlands, Congo, Papua New Guinea, Azerbaijan, Botswana, Niger, United Arab Emirates, Bulgaria, Dominica, Rwanda, Monaco, Jordan, Gambia, Kiribati, Eswatini, Nepal, Iraq, Seychelles, Sweden, Kenya, Ukraine, Uganda, Bosnia and Herzegovina, Israel, Brunei, Chile, Denmark, Equatorial Guinea, Nigeria, Paraguay, Laos, Zimbabwe, Iran, Sierra Leone, Moldova, Lithuania, Turkey, Greece, Cape Verde. A well-developed logistics bond and a partnership network guide us to dispatch our units anywhere in the earth with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To request or make a request, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. Working pressure with vacuum operation, connection 1: min. 3 bar , connection 3: min. - 0.95 bar The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |