We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822333541
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 500 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822333541, reach FAMAGA, the world's prime retailer of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and special attention to each buyer. We praise everyone, who liased with us - so, our regular buyers procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Malta, Jamaica, Chad, Malawi, Burma, Japan, Tonga, Poland, Austria, Serbia, Bangladesh, Lebanon, Senegal, Georgia, Tanzania, Monaco, Mali, Iceland, Zimbabwe, Turkmenistan, Kuwait, Ecuador, Saudi Arabia, Zambia, Lithuania, Gambia, Angola, Bulgaria, East Timor, Ghana, Nigeria, Burundi, Tunisia, Moldova, Australia, Slovakia, North Korea, Iraq, Qatar, Libya, Hungary, Equatorial Guinea, Israel, Benin. A well-elaborated logistics chains and a partnership network allow us to ship our goods anywhere in the planet immediately without compromising product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is rising every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or make a request, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |