We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822233041
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 500 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822233041, catch up with FAMAGA, the world's major distributor of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and particular attention to each customer. We cherish everyone, who conspired with us - thus, our regular clients procure the most convenient purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4500 such clients, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Malaysia, Malta, Monaco, Netherlands, Oman, Gambia, Cyprus, Czech Republic, Latvia, Laos, Mauritius, Canada, Swaziland, Cameroon, Switzerland, Uzbekistan, Benin, Peru, Bosnia and Herzegovina, Fiji, Australia, El Salvador, Japan, Samoa, Pakistan, Guyana, Antigua and Barbuda, Yemen, Equatorial Guinea, Indonesia, Serbia, The Gambia, Philippines, Guatemala, Suriname, Belarus, Qatar, Tajikistan, Denmark, Mexico, South Korea, Haiti, Poland, Moldova. A well-developed logistics series and a partnership network guide us to conduct our items anywhere in the world quickly without discrediting product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To consult or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |