We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001446
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001446, connect FAMAGA, the world's prime distributor of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each orderer. We respect everyone, who conspired with us - hence, our regular customers obtain the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Mexico, Myanmar, Mauritania, Malawi, Portugal, Guatemala, Palestine, United Arab Emirates, Niger, Brazil, Macedonia, Iraq, Kazakhstan, Belize, Saudi Arabia, Laos, Antigua and Barbuda, Pakistan, Liechtenstein, Burundi, Monaco, Benin, Azerbaijan, Malta, Bosnia and Herzegovina, Czech Republic, Nepal, Mali, Israel, Vietnam, Montenegro, Seychelles, Sierra Leone, Latvia, Cape Verde, Andorra, Iceland, Uruguay, Austria, Thailand, Tanzania, Australia, Ghana. A well-elaborated logistics network and a partnership network guide us to dispatch our products anywhere in the world promptly without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |