We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822391903
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822391903, call FAMAGA, the world's top supplier of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each buyer. We cherish everyone, who collaborated with us - so, our regular buyers get the most desirable purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4500 such consumers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Mauritius, Kuwait, Malta, Uzbekistan, Yemen, Chad, Ecuador, Palestine, Botswana, Turkey, Senegal, Niger, Guinea, Nicaragua, Algeria, Macedonia, Czech Republic, Armenia, Afghanistan, The Gambia, Norway, Monaco, Kiribati, Cyprus, Madagascar, Kenya, Mongolia, Liechtenstein, Qatar, Uganda, Azerbaijan, Kazakhstan, New Zealand, Benin, Sierra Leone, Syria, Tanzania, Haiti, Antigua and Barbuda, Belarus, Lithuania, Rwanda, Equatorial Guinea, Tunisia, Namibia, North Korea, Iraq. A well-developed logistics chains and a partnership network cheer us to send our items anywhere in the globe immediately without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that users choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |