We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503165
Description
Standardization | ISO 5599-1 |
Accessory type | type F |
Frame size | ISO 2 ▶ ISO 3 |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1825503165, call FAMAGA, the world's key distributor of mechanized equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of merchandises and personalseparate attention to each buyer. We respect everyone, who conspired with us - hence, our regular clients get the most desirable purchase conditions and discounts on the factory-made equipment market. At present, there are more than 3500 such customers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Iraq, New Zealand, Qatar, Iran, The Bahamas, Angola, Honduras, Moldova, Nepal, Kuwait, Belarus, Romania, Ecuador, Tajikistan, Cape Verde, Mexico, Serbia, Montenegro, Cameroon, Togo, Turkmenistan, Estonia, Tanzania, Senegal, Djibouti, Finland, Russia, Eswatini, Mauritius, El Salvador, Indonesia, Dominica, Brazil, Fiji, Equatorial Guinea, Bolivia, Bosnia and Herzegovina, Philippines, Rwanda, Botswana, Seychelles, Zimbabwe, Croatia, Ireland, Cyprus, Antigua and Barbuda. A well-developed logistics chains and a partnership network guide us to deliver our products anywhere in the planet quickly without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this amount is ascending every day. We are happy that users choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To consult or order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 5599-1 |
Working pressure min./max. | -0,95 ... 16 bar |
Ambient temperature min./max. | -15 ... 70 °C |
Medium temperature min./max. | -15 ... 80 °C |
Medium | Compressed air |
Exhaust (3,5) | uncollected exhaust |
Exhaust type | Ports separated |
Mounting screw | hexagon head |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum |
Base plate | Aluminum |
Seal | Acrylonitrile butadiene rubber |