We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1332001000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 12 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 1332001000, catch up with FAMAGA, the world's prime retailer of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of products and individual attention to each purchaser. We esteem everyone, who conspired with us - hence, our regular clients procure the most beneficial purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Bosnia and Herzegovina, Central African Republic, Panama, New Zealand, Nicaragua, Georgia, Oman, Niger, Suriname, Morocco, South Korea, Netherlands, Colombia, Luxembourg, Latvia, Albania, Senegal, North Korea, China, Azerbaijan, Serbia, Kenya, Thailand, Cape Verde, Pakistan, Angola, Norway, Haiti, The Gambia, Yemen, East Timor, Slovakia, Iraq, Djibouti, Russia, Malaysia, Czech Republic, United States, Mexico, Burundi, Qatar, Egypt, United Arab Emirates, Cameroon. A well-shaped logistics link and a partnership network cheer us to dispatch our elements anywhere in the globe immediately without undermining product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are happy that users choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To get some advice or book, get in touch with us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |