We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1823390026
Description
Number of valve positions | 12 |
Subbase | Aluminum |
Compressed air connection input | G 1/4 |
For series | ST |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1823390026, get in touch with FAMAGA, the world's influential vendor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and individual attention to each purchaser. We esteem everyone, who conspired with us - hence, our regular customers obtain the most beneficial purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such buyers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Bahrain, Bangladesh, Vietnam, Central African Republic, South Sudan, Philippines, Romania, Chile, Dominica, Sweden, Mozambique, Monaco, Canada, Peru, Indonesia, Samoa, Thailand, Andorra, Estonia, Belize, Albania, Macedonia, Australia, Luxembourg, Benin, Georgia, Ukraine, Tajikistan, Jamaica, Kuwait, Costa Rica, Hungary, Bosnia and Herzegovina, Cape Verde, Angola, Cyprus, Paraguay, Guatemala, Latvia, Antigua and Barbuda, Panama, Belarus, Switzerland, North Korea. A well-built logistics series and a partnership network assist us to deliver our units anywhere in the planet as soon as possible without compromising product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is increasing every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or book, contact us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | 0 ... 10 bar |
Ambient temperature min./max. | 0 ... 80 °C |
Medium temperature min./max. | 0 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Grid dimension | 18 mm |
Direction of pneumatic port (1) | On the side |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |