We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000383
Description
Adjustable angle of rotation max. | 90 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-20 |
Version | double piston with rack |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412000383, communicate with FAMAGA, the world's foremost provider of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each orderer. We cherish everyone, who cooperated with us - so, our regular consumers receive the most convenient purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, The Bahamas, Egypt, Cape Verde, Samoa, Cyprus, Central African Republic, Netherlands, Chad, Costa Rica, Switzerland, Croatia, Afghanistan, Liberia, Indonesia, Monaco, Singapore, Argentina, Seychelles, Nigeria, Latvia, Israel, Fiji, Russia, Comoros, Swaziland, Albania, Hungary, Vietnam, Finland, Angola, Eswatini, Uganda, Djibouti, Mozambique, Serbia, United States, Sierra Leone, Morocco, Burundi, Laos, Ireland, Dominica, Mauritania, Mali. A well-elaborated logistics system and a partnership network cheer us to dispatch our goods anywhere in the world with no delay without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To ask a question or make a request, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
air duct | with air duct |
Cushioning | elastic |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |