We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020690
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412020690, call FAMAGA, the world's foremost producer of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each orderer. We respect everyone, who worked with us - so, our regular consumers obtain the most favorable purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Seychelles, Malawi, Dominican Republic, Saudi Arabia, Cuba, Italy, Burma, Dominica, South Korea, Rwanda, Costa Rica, Singapore, Morocco, Andorra, Kyrgyzstan, Mozambique, Russia, Netherlands, Togo, Qatar, Madagascar, Laos, South Sudan, Mauritius, Burundi, Brunei, Bangladesh, United States, El Salvador, Tajikistan, Jordan, Panama, Afghanistan, Mauritania, Bulgaria, Djibouti, Croatia, Bolivia, Czech Republic, Cape Verde, Vietnam. A well-developed logistics bond and a partnership network cheer us to dispatch our goods anywhere in the world with no delay without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To ask a question or order, contact us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |