We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822082205
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822082205, call FAMAGA, the world's key producer of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of items and private attention to each consumer. We understand everyone, who worked with us - thus, our regular purchasers bring in the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 3500 such purchasers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, San Marino, Mali, Laos, East Timor, Bahamas, Mauritius, Lithuania, Italy, Andorra, Namibia, Angola, Egypt, Burma, Kuwait, China, El Salvador, Mauritania, Mozambique, Togo, Libya, Jordan, Switzerland, Uzbekistan, Estonia, Norway, Iran, Luxembourg, United States, Philippines, India, Nicaragua, Cyprus, Azerbaijan, Seychelles, Ghana, United Arab Emirates, Malaysia, Bolivia, Albania, Bangladesh, Yemen, Zimbabwe, Guatemala, Mongolia, Ireland, Syria, Burkina Faso, Moldova. A well-built logistics chains and a partnership network help us to dispatch our items anywhere in the world on-time without disreputing product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To request or order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |