We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820260704
Description
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 800 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Activation | pneumatically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820260704, connect FAMAGA, the world's top supplier of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of products and personalseparate attention to each purchaser. We respect everyone, who worked with us - therefore, our regular buyers receive the most flexible purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Bulgaria, Oman, Canada, Austria, Singapore, El Salvador, Eritrea, Ghana, Papua New Guinea, Namibia, Senegal, Luxembourg, Morocco, Cameroon, Romania, South Korea, Estonia, Suriname, Mauritius, Belarus, Algeria, Iceland, Egypt, Mozambique, Niger, The Bahamas, Fiji, Seychelles, Swaziland, Finland, Rwanda, Togo, Benin, Croatia, Costa Rica, Nicaragua, Ireland, Pakistan, Mauritania, Afghanistan, United Arab Emirates, Georgia, Kiribati, Nepal, Paraguay, Kuwait, Kenya, Dominica, Thailand. A well-developed logistics connection and a partnership network allow us to dispatch our units anywhere in the earth on-time without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | pneumatically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Flow rate value | 800 l/min |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2 Nm |
Weight | 0,09 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Caution: The minimum control pressure depends on the working pressure (see "Control pressure" diagram below). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, chrome-plated nickel-plated |