We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226639000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 400 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5226639000, catch up with FAMAGA, the world's chief provider of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and private attention to each buyer. We respect everyone, who conspired with us - thus, our regular clients accept the most helpful purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Australia, Japan, Netherlands, Senegal, Monaco, Philippines, Guyana, Thailand, Oman, Slovakia, New Zealand, Samoa, East Timor, Bahamas, Denmark, The Bahamas, Mexico, Finland, Mauritius, Burma, Seychelles, Singapore, Greece, Poland, Latvia, Rwanda, Russia, The Gambia, Madagascar, Sweden, United States, Austria, Luxembourg, Mauritania, United Arab Emirates, Nicaragua, Angola, Burkina Faso, Guatemala, Mozambique, Yemen, Djibouti, Qatar, Mongolia, Syria, Bulgaria, Dominica, Armenia, Haiti, Central African Republic. A well-elaborated logistics system and a partnership network cheer us to dispatch our units anywhere in the globe on-time without discrediting product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |