We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001292
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001292, make contact with FAMAGA, the world's main vendor of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each purchaser. We esteem everyone, who joined with us - so, our regular purchasers procure the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Uruguay, The Bahamas, Monaco, Thailand, Guyana, Malaysia, Fiji, Australia, Romania, Hungary, Central African Republic, Botswana, Costa Rica, Slovenia, Tanzania, Nicaragua, Latvia, Pakistan, Haiti, Bhutan, Mexico, Eritrea, Namibia, Seychelles, Indonesia, Czech Republic, Angola, Jamaica, Brunei, Syria, Guatemala, Ghana, Peru, Burkina Faso, Switzerland, South Sudan, Georgia, Poland, Mauritania, Comoros, Kuwait, Cape Verde, Panama, Zambia, Mauritius, Turkey, East Timor, Iceland, Tajikistan, Bangladesh. A advanced logistics connection and a partnership network assist us to ship our products anywhere in the globe promptly without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or book, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |